Guide

Smoke and Carbon Monoxide Alarms: Where They Go and How to Keep Them Working

Which alarms a home needs, where they belong, how to make sure everyone hears them, and what smart alerts can and can't add.

14 min read

We may earn a commission from qualifying purchases made through links on our site. As an Amazon Associate, we earn from qualifying purchases. Learn more

Smoke alarms and carbon monoxide (CO) alarms do two different jobs. A smoke alarm warns you about fire. A CO alarm warns you about a gas you can't see or smell. Fire-safety authorities recommend both, placed in the right spots, connected so everyone in the home hears them, and tested and replaced on schedule.

That setup matters more with age. The U.S. Fire Administration reports that in 2023, adults 65 and older had, on average, 2.5 times the risk of dying in a fire compared with the general population.

This guide is for anyone setting up or checking alarms in their own home, and for family members or caregivers helping someone else.

Jump to: Where alarms go · Choosing alarms · Keeping alarms working · When an alarm sounds · Smart alarms & alerts

At a glance

  • Smoke alarms: in every bedroom (every room where someone sleeps), outside each sleeping area, and on every level of the home, including the basement.
  • CO alarms: in a central spot outside each sleeping area and on every level of the home.
  • Interconnected alarms are recommended: when one sounds, they all sound.
  • Test every alarm once a month.
  • Replace smoke alarms 10 years after the manufacture date. Replace CO and combination alarms when the manufacturer says to.
  • If a smoke alarm sounds: get out, call 911 and stay out. If a CO alarm sounds: get to fresh air and call for help from there. What to do when an alarm sounds
  • Smart alarms and smart speakers can add alerts on your phone. They don't replace working alarms.
  • Local rules can differ. See the note on local requirements

What protection does a home need?

Smoke alarms sense smoke and sound a loud warning so people can get out.

Carbon monoxide (CO) alarms sense carbon monoxide, an odorless, colorless gas made when fuel doesn't burn completely. Common sources include:

  • furnaces, water heaters, gas ranges, fireplaces and grills
  • vehicles or generators running in or near the home

The CDC notes that CO can kill without warning, and that people who are asleep can be harmed before they notice any symptoms. That's why an alarm matters.

The U.S. Fire Administration says CO alarms are especially important if your home is heated by anything other than electricity. Even an all-electric home can have CO from sources like a car left running in an attached garage.

Combination smoke and CO alarms do both jobs in one unit. Each function still needs to meet its own safety standard (see Choosing alarms), and the unit has to be in a place that works for both kinds of protection.

A note on terms. Stores often say “smoke detector” and “CO detector.” Fire-safety organizations generally say alarm for the self-contained units used in homes, and we do the same. “Combination” is also sometimes used for a smoke alarm with two smoke-sensing technologies. Here, a combination alarm means one that detects both smoke and carbon monoxide.

Where alarms go

Smoke alarms

The National Fire Protection Association (NFPA), the U.S. Fire Administration and the Consumer Product Safety Commission (CPSC) all recommend smoke alarms:

  • inside every bedroom or room where someone sleeps
  • outside each sleeping area, such as the hallway outside the bedrooms
  • on every level of the home, including the basement

Larger homes may need more.

Mount smoke alarms on the ceiling or high on a wall, following the instructions that come with the alarm.

Near the kitchen and bathroom: cooking and shower steam are common causes of nuisance alarms.

  • NFPA recommends keeping smoke alarms at least 10 feet from a cooking appliance. Some alarms designed to reduce cooking nuisance alarms may be placed somewhat closer if their manufacturer allows it.
  • NFPA also recommends keeping alarms at least 3 feet from bathrooms with a shower or tub, and away from vents and ceiling fans.
  • The type of smoke alarm also matters near a kitchen; see Smoke-sensing types.

CO alarms

NFPA recommends CO alarms in a central location outside each sleeping area and on every level of the home, plus anywhere else your local laws or codes require. The U.S. Fire Administration and CPSC give the same core advice.

Follow the manufacturer's instructions for placement and mounting height, since these vary between models.

CPSC also advises:

  • not installing CO alarms in kitchens or directly above fuel-burning appliances
  • keeping them away from heating vents and anywhere furniture or curtains could block them

If you use combination alarms

A combination unit mounted outside the bedrooms covers the CO recommendation for that spot. It doesn't put a smoke alarm inside each bedroom. When you plan your layout, check that every recommended smoke-alarm location and every recommended CO-alarm location is covered, whichever type of unit you use there.

Local requirements can differ. The guidance here comes from national fire-safety organizations and federal agencies. These are recommendations, not the law where you live. Your state or city may set its own requirements, which can depend on:

  • the age and type of your home
  • whether it's new construction or being sold
  • whether it's a rental, which can also affect who installs and maintains alarms

Your alarm's instructions matter too. Your local fire department or building department can tell you what applies to your home.

Making sure every alarm is heard: interconnection

Interconnected alarms work as a team. When one sounds, they all sound.

That matters most when you might not hear an alarm in another part of the house: an alarm in the basement, say, when you're asleep upstairs with the bedroom door closed.

How strongly the experts put it varies a little:

  • NFPA and the U.S. Fire Administration recommend interconnecting alarms throughout the home for the best protection.
  • CPSC says interconnected smoke alarms may provide improved protection and more time to escape.
  • For CO alarms, CPSC says interconnected alarms are best.

These are recommendations. Whether interconnection is required in a particular home depends on local codes.

There are two ways to interconnect alarms:

  • Hardwired: alarms are wired to each other. This should be done by a qualified or licensed electrician.
  • Wireless: battery-powered alarms that communicate with each other without new wiring.

Compatibility matters. NFPA notes that interconnected alarms should come from the same manufacturer, because alarms from different brands may not work together. Manufacturers also note that walls and floors can limit wireless range, so check their guidance for your layout.

How alarms are powered

There are three common setups. They differ in how you keep them powered, not in how often you test them.

  • Replaceable-battery alarms run on batteries you change yourself. Use the battery type the manufacturer specifies.
  • Sealed long-life battery alarms have a non-replaceable battery designed to last up to 10 years. You don't change the battery. When the alarm signals that it's reaching the end of its life, you replace the whole alarm.
  • Hardwired alarms run on your home's electricity and are typically installed during construction or renovation. Many have a backup battery so they keep working during a power outage; if you choose hardwired alarms, look for battery backup. Hardwired alarms should be installed by a qualified electrician, so this guide doesn't cover wiring.

Keep three questions separate:

  1. Testing: every alarm, of every type, should be tested monthly.
  2. Battery replacement: depends on the type of alarm (see Keeping alarms working).
  3. Replacing the alarm itself: smoke alarms at 10 years; CO and combination alarms on the manufacturer's schedule.

A sealed battery removes the battery chore. It doesn't remove the need to test, or to replace the alarm when its time is up.

Some states and cities require a particular type of alarm in some situations. See the note on local requirements.

Choosing alarms

You don't need a “best” brand. You need alarms that do the right job, are properly certified, and suit your home.

Look for a listing from a recognized testing laboratory

Smoke and CO alarms are tested against safety standards:

  • UL 217 covers smoke alarms.
  • UL 2034 covers carbon monoxide alarms.

NFPA recommends choosing alarms listed by a recognized testing laboratory. Look for the lab's certification mark on the product or package. UL is one such laboratory, but not the only one; other recognized labs, such as Intertek (the ETL mark), also certify alarms to these standards.

For combination smoke and CO alarms, both functions need to be certified, to the smoke-alarm standard and to the CO-alarm standard. CPSC has advised consumers to buy only combination units that meet both.

Smoke-alarm testing standards were also updated recently. To be certified, alarms tested from mid-2024 onward have had to pass updated tests, including tests for different kinds of fires and a cooking test aimed at reducing nuisance alarms.

Smoke-sensing types

Smoke alarms sense smoke in different ways:

  • Ionization alarms tend to respond faster to fast, flaming fires.
  • Photoelectric alarms tend to respond faster to slow, smoldering fires.

Because each type is better at sensing a different kind of fire, NFPA and the U.S. Fire Administration recommend using both types or dual-sensor alarms that combine them. NFPA also suggests considering newer multi-criteria alarms, which use more than one sensor, when you replace old alarms. Many are labeled as helping reduce cooking nuisance alarms.

Near the kitchen:

  • NFPA describes photoelectric alarms as the better choice near kitchens and bathrooms, to cut down on nuisance alarms.
  • CPSC advises against putting an ionization alarm in or near the kitchen.

Since 2024, alarms of every sensing type have had to pass the same updated tests to be certified, and those tests don't favor one technology. There isn't a simpler one-type rule. Choose listed alarms, follow the guidance above, and pay attention to placement near the kitchen.

What to look for

What to checkPriorityWhy it matters
Alarm function: smoke, CO or combinationCoreEvery recommended location gets the right protection
Certification for each functionCoreLook for a recognized lab's mark. A combination alarm should be certified for both smoke and CO
Smoke-sensing typeCoreSee Smoke-sensing types, especially for alarms near the kitchen
Power source: replaceable battery, sealed long-life battery or hardwiredCoreDecides your battery upkeep and whether you need an electrician
Battery backup (hardwired alarms)CoreKeeps a hardwired alarm working in a power outage
Interconnection method and compatibilityCoreWired or wireless. Alarms generally need to be from the same manufacturer to work together
Replacement or service-life informationCoreCheck the manufacturer's stated life, especially for CO and combination alarms
Accessibility alertsUseful (core if someone may not hear the alarm)Strobe lights, compatibility with bed shakers, or a low-frequency sound
Phone or app notificationsUsefulOptional alerts when you're away; they depend on Wi-Fi, an app and an account
Shared notifications for familyUsefulSome smart alarms let other people receive alerts; not all do
Connectivity needsUsefulCheck the Wi-Fi requirements, and whether the alarm still sounds and interconnects without Wi-Fi
Subscription requirementsUsefulSome extra features need a paid plan; know what works without one
Voice or location announcementsOptionalSome alarms say what's wrong and where, such as “smoke in the hallway”
Self-test or status reportsOptionalSome alarms report their status in an app; you still test monthly

If someone may not hear an alarm

Many people hear a standard alarm without trouble. If someone in the home has reduced hearing, or takes hearing aids out to sleep, NFPA and the U.S. Fire Administration describe several options:

  • Strobe lights that flash when the alarm sounds. NFPA describes these as a visual warning; for waking someone up, its guidance points to bed shakers and low-pitched sound.
  • Pillow or bed shakers that vibrate to wake a sleeping person. NFPA notes they're set off by the sound of a standard smoke alarm.
  • Low-frequency alarms, with a lower-pitched sound. NFPA recommends them for people with mild to severe hearing loss.

Choose accessory devices listed by a recognized testing laboratory, and keep a phone, and hearing aids if used, close to the bed.

Some alerting devices respond to CO alarms as well as smoke alarms. Others don't, so check compatibility with the manufacturer before relying on one for both.

Keeping alarms working

Test monthly

Test every smoke and CO alarm at least once a month using the test button. If a smoke alarm doesn't sound when tested, NFPA says to change its battery or, if it's over 10 years old, replace the alarm. A sealed-battery alarm that fails its test should be replaced.

For CO alarms, CPSC notes that the test button checks the alarm's electronics, not the accuracy of its sensor. That's one more reason to replace CO alarms on the manufacturer's schedule.

Batteries

  • Replaceable batteries: NFPA, the U.S. Fire Administration and CPSC say to replace them at least once a year. (Ready.gov advises twice a year for alarms that don't use 10-year lithium batteries.)
  • Hardwired alarms: the U.S. Fire Administration advises replacing the backup battery yearly.
  • Sealed long-life batteries: no battery changes. Replace the whole alarm when it signals end of life.

What the chirps mean

According to NFPA:

  • A single chirp every 30 or 60 seconds means the battery is low.
  • Chirping that continues after you've replaced the battery means the alarm has reached the end of its life and needs replacing.

Sounds vary between models, so learn your alarms' sounds from their manuals, especially the difference between an emergency alarm, a low-battery chirp and an end-of-life signal.

When to replace alarms

TaskSmoke alarmsCO alarmsCombination smoke/CO alarms
TestMonthlyMonthly (the button tests the electronics, not the sensor)Monthly
BatteriesReplaceable: at least yearly. Sealed: noneReplaceable: yearly, per CPSC. Sealed: none. Follow the manufacturerFollow the manufacturer
Replace the alarm10 years after the manufacture date, or sooner if it fails a test or signals end of life. Replace it if you can't find a dateWhen the manufacturer says toWhen the manufacturer says to

CO alarm life varies by model. NFPA and CPSC both say to replace CO alarms according to the manufacturer's instructions. The CDC's guidance is to follow the manufacturer's recommendation or replace them every five years. Where intervals differ, follow your alarm manufacturer's instructions.

Clean and maintain alarms as the manufacturer describes.

When an alarm sounds

If a smoke alarm sounds

  • NFPA's guidance is simple: “Get out, call 9-1-1, and stay out.”
  • Leave right away and go to your outside meeting place. Call 911 from outside.
  • Never go back inside for people, pets or belongings.
  • In a fire, you may have as little as two minutes to get out. That's why NFPA recommends practicing your escape plan twice a year, once at night and once during the day.

If a CO alarm sounds

  • Move to fresh air immediately, outdoors or beside an open window or door.
  • Make sure everyone in the home is accounted for.
  • Call 911 or the fire department from the fresh-air location.
  • Don't go back inside until emergency responders say it's safe.
  • If the alarm sounds again within 24 hours, CPSC advises repeating these steps and having a qualified technician inspect your fuel-burning appliances.

Know your alarms' signals.

  • A smoke alarm's emergency signal is three loud beeps in a row.
  • Check your CO alarm's manual for its emergency sound and its trouble signal.
  • If a CO alarm gives a trouble signal, NFPA says to check for a low battery and replace it. If it keeps sounding, call the fire department.

Don't disable an alarm because of cooking smoke. Use the hush button if it has one, open a window, or move the alarm farther from the kitchen. Never remove the battery to stop nuisance alarms.

Smart alarms and remote alerts: helpful extras, not replacements

Smart features can be useful. They sit on top of the basics, not in place of them. A home is protected by working alarms in the right places, interconnected, tested and replaced on time.

What smart alarms can add

Depending on the model, smart smoke and CO alarms may offer:

  • Phone notifications when an alarm sounds, even when you're away
  • Shared alerts, so other people you choose can also be notified
  • Status and self-test reports in an app
  • Voice announcements that say what's wrong and, on some models, where
  • Wireless interconnection between compatible alarms
  • Silencing a nuisance alarm from your phone, within limits the manufacturer sets
  • Low-battery and end-of-life notices in the app

None of these is universal. Most depend on several things working at once:

  • a Wi-Fi connection (sometimes a specific type)
  • internet service
  • the manufacturer's app and an account
  • your phone's notification settings
  • sometimes a paid plan
  • the manufacturer continuing to support the product

Before you rely on a smart alarm, check what happens without Wi-Fi. Some smart alarms keep detecting, sounding and interconnecting locally when the internet is down, and lose only the phone features. Not every manufacturer says so. Look for a clear statement in the manual.

Smart speakers that listen for alarms

Some smart speakers and displays can listen for the sound of a smoke or CO alarm and send a notification to your phone. The speaker is not a smoke or CO alarm. It can't sense smoke or carbon monoxide. It can only react to a working alarm that's sounding loudly enough for it to hear.

All three major platforms make this clear in their own guidance:

  • Apple: Sound Recognition can notify your iPhone, iPad or Apple Watch when a supported device hears a smoke or CO alarm. Apple's product pages list the feature for HomePod (2nd generation), HomePod mini 2 and Apple HomeView. It needs current software (and, for HomePod, Apple's updated Home architecture), and it must be turned on in the Home app. Apple says Sound Recognition shouldn't be relied on where you could be harmed or injured, or in emergencies.
  • Amazon: Echo speakers and displays can send a Smart Alert to your phone when they hear a smoke or CO alarm. This is part of Alexa Emergency Assist, a paid subscription available in the U.S. Smart Alerts are turned off by default. Amazon says the feature may not detect every alarm, that Echo devices can't detect smoke or CO themselves, and that alerts are for informational purposes only and aren't professional monitoring.
  • Google: Supported Google speakers and displays can detect the sound of smoke and CO alarms. This needs a Google Home Premium subscription and a U.S. address saved in the Google Home app. Google says sound detection isn't a replacement for an alarm system and can't contact emergency services for you.

Our Smart Speakers guide covers these devices in more detail.

Remote alerts for family and caregivers

A remote alert can let a family member know that an alarm is sounding at a relative's home. But a notification only helps if:

  • the system is connected
  • the alert gets through
  • someone sees it in time and is able to act

A remote alert is not the same as:

  • Professional monitoring, a paid service where someone else watches for alarms. Some manufacturers offer it as a separate plan.
  • Emergency dispatch. Alarms and speakers don't call the fire department on their own. Google says its feature can't contact emergency services. Amazon says its Urgent Response service isn't a 911 service.
  • Medical monitoring, which these devices don't provide.

Think of remote alerts as an added layer of awareness, alongside working alarms and a clear plan for what everyone does if an alarm sounds.

Helping someone else stay protected

If you help a parent or relative with their home, a few practical steps can help:

  • Help with testing and replacement. The U.S. Fire Administration advises caregivers to check the smoke alarms of anyone who can't do it themselves.
  • Talk through the escape plan. NFPA suggests naming a helper, and a backup, for anyone who would need assistance getting out. Share the plan with family and neighbors.
  • Think about the route out. Fire-safety guidance suggests knowing two ways out of every room. For someone who uses a walker or wheelchair, check that doorways along the route are wide enough. Sleeping on the ground floor or near an exit can also help.
  • Set up shared alerts if they're useful, knowing they add awareness rather than guarantee a response. Our Smart Home Guide for Older Adults explains how adding family members to smart-home apps generally works.

For planning home-safety changes together, see Helping an Older Parent Make Their Home Safer.

Frequently asked questions

Do I need a CO alarm if my home is all-electric?

National guidance recommends CO alarms outside sleeping areas and on every level. The U.S. Fire Administration says they’re especially important if your home is heated by anything other than electricity. CO can also come from other sources, such as a vehicle running in an attached garage. Whether CO alarms are legally required in your home depends on local rules.

Is a combination smoke/CO alarm as good as separate alarms?

It can provide both kinds of protection, as long as both functions are certified by a recognized testing laboratory. The bigger question is placement: make sure every recommended smoke-alarm location, including inside bedrooms, and every recommended CO-alarm location is covered.

Does a 10-year sealed-battery alarm still need testing?

Yes. You won’t change its battery, but test it monthly like any other alarm, and replace the whole unit when it signals end of life.

Why is my alarm chirping?

According to NFPA, a single chirp every 30 or 60 seconds means a low battery. If it keeps chirping after a new battery, the alarm has reached the end of its life and needs replacing. For a CO alarm’s trouble signal, NFPA says to check the battery first and call the fire department if it continues. Sounds vary by model, so check the manual.

Can my smart speaker replace a smoke alarm?

No. Apple, Amazon and Google all say their speakers can only recognize the sound of a working alarm. They can’t detect smoke or carbon monoxide themselves.

Will a smart alarm still work if the Wi-Fi goes down?

It depends on the model. Some keep sensing, sounding and interconnecting without Wi-Fi and lose only the phone features. Check the manufacturer’s documentation before you buy.

Can I get alerts on my phone if a parent’s alarm goes off?

Often, yes. Some smart alarms can share alerts, and some smart speakers can notify household members when they hear an alarm. These depend on Wi-Fi, apps and sometimes subscriptions. They aren’t professional monitoring and don’t call emergency services on their own.

Free Home Ease Checklist

Make Your Home Better for You

Your home should make everyday life easier—not harder. Get our free room-by-room checklist with 50 practical ways to make your home safer, more comfortable, and easier to live in today while preparing for the future.

  • Kitchen & everyday tasks
  • Bathroom comfort & safety
  • Bedroom & getting around
  • Lighting, stairs & entryways

The Home Ease Checklist

50 simple ways to make your home safer, more comfortable & easier to live in. Tell us where to send it.

Free to download. No spam — unsubscribe any time.